GOST 10922-2012

ГОСТ 10922-2012

Welded reinforcing products and inserts, welded, lap and mechanical joints for reinforced concrete structures. General specifications

Арматурные и закладные изделия, их сварные, вязаные и механические соединения для железобетонных конструкций. Общие технические условия

Status: Not effective - Canceled in the Russian Federation. Information about the registration of 1835-st dated November 24, 2017 (the official website of Rosstandart); IUS 3-2018

The standard applies to welded reinforcement and embedded products of reinforced concrete structures, welded, knitted and mechanical connections of reinforcing bars made in the manufacture and installation of prefabricated and erection of monolithic reinforced concrete structures, and establishes requirements for reinforcement products made from reinforcing steel rod and reinforcing wire with a diameter of 3 mm and more . The standard does not apply to embedded products that do not have anchor rods of reinforcing steel.

Стандарт распространяется на сварные арматурные и закладные изделия железобетонных конструкций, сварные, вязаные и механические соединения арматурных стержней, выполняемых при изготовлении и монтаже сборных и возведении монолитных железобетонных конструкций,и устанавливает требования к арматурным изделиям из стержневой арматурной стали и арматурной проволоки диаметром 3 мм и более. Стандарт не распространяется на закладные изделия, не имеющие анкерных стержней из арматурной стали.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 36

Approved: Federal Agency for Technical Regulation and Metrology, 11/29/2012

SKU: RUSS71220

Price: $441.75

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 5. Regulatory documents for building structures and products » k.52 Reinforced concrete and concrete structures »

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Pipelines »

Welding regulations » Metal structures »

Welding regulations » Welding materials »

Welding regulations » Welding staff »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Mechanical Testing »

Welding regulations » Heat treatment »

Welding regulations » Defects »

Welding regulations » Assembly devices »

Welding regulations » Welding work » Mechanized welding »

Welding regulations » Main materials » Steel, cast iron »

Welding regulations » Welding materials » Fluxes »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.190 Fittings for buildings »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.190 Fittings for buildings »

National Standards for KGS (State Standards Classification) » Latest edition » Zh Construction and building materials » Zh3 Building structures and parts » Zh33 Stone, brick, concrete and reinforced concrete structures and parts »

As a Replacement Of:

GOST 10922-90: Welded reinforcing products and inserts, welded joints of reinforcement and inserts for reinforced concrete structures. General specifications

The Document References:

GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles

GOST 1.2-2009: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. Rules for development, taking over, application, renovation and cancellation

GOST 10884-94: Thermomechanically hardened steel bars for reinforced concrete constructions. Specifications

GOST 10922-90: Welded reinforcing products and inserts, welded joints of reinforcement and inserts for reinforced concrete structures. General specifications

GOST 12004-81: Reinforcing-bar steel. Tensile test methods

GOST 14098-91: Welded joints of reinforcement and inserts for reinforced concrete structures. Types, constructions and dimensions

GOST 14192-96: Cargo marking

GOST 21779-82: System of ensuring of geometrical parameters accuracy in construction. Manufacturing and assembling tolerances

GOST 23279-2012: Welded reinforcing meshes for reinforced concrete structures and products. General specifications.

GOST 23279-85: Welded reinforcing meshes for reinforced concrete structures and products. General specifications

GOST 23858-79: Welded joints butt and T-formed of reinforcement steel bars. Ultrasonic methods of quality inspection. Acceptability requirements

GOST 3749-77: Checking 90° squares. Specifications

GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications

GOST 6727-80: Cold-drawn low-carbon steel wire for reinforced concrete. Specifications

GOST 8828-89: Base paper and two-layer waterproof packaging paper

GOST R 52544-2006: Weldable deformed reinforcing rolled products of A500C and B500C classes for reinforcement of concrete constructions. Specifications

The Document is Referenced By:

GOST 11024-2012: Concrete and reinforced concrete panels for external walls of residential and civil buildings. General specifications

GOST 12504-2015: Concrete and reinforced concrete panels for internal walls of residential and civil buildings. General specifications

GOST 12767-2016: Reinforced concrete solid slabs for floors in lange-panel buildings. General specifications

GOST 13578-2019: Lightweight concrete panels on porous aggregates for the exterior walls of industrial buildings. General specifications

GOST 14098-2014: Welded joints of reinforcement and inserts for reinforced concrete structures. Types, constructions and dimensions

GOST 17538-2016: Reinforced concrete constructions and products for lift shafts of residential buildings. Specification

GOST 17608-2017: The concrete paving slabs. Specifications

GOST 18048-2018: Reinforced сoncrete sanitary cabins. Specifications

GOST 18979-2014: Reinforced concrete columns for multi-storey buildings. Specification

GOST 18980-2015: Reinforced concrete collar beams for multistory buildings. Specifications

GOST 19330-2013: Masts (poles) for overhead contact line supports of railways. Specifications

GOST 19570-2018: Panels made of autoclaved aerated concrete for floors of residential and public buildings. Technical specifications

GOST 20213-2015: Reinforced concrete roof trusses. Specifications

GOST 20372-2015: Reinforced concrete rafter and longitudinal beams. Specifications

GOST 22131-2016: Concrete towers for railway high voltage signal line of autoblock. Technical requirements

GOST 23858-2019: Welded butt joints of reinforced concrete structures. Ultrasonic methods of quality control. Acceptance rules

GOST 24155-2016: High passengers platform reinforced concrete structures. Specifications

GOST 24547-2016: Reinforced concrete culvert sections under highway and railway embankments. Specifications

GOST 24893-2016: Reinforced concrete frame brace for industrial buildings. Specifications

GOST 25098-2016: Reinforced concrete panels for partitions in industrial and agricultural buildings. Specifications

GOST 25628.1-2016: Reinforced concrete columns for single-storey industrial buildings. Specifications

GOST 25697-2018: Reinforced concrete slabs for balconies and loggias. General specifications

GOST 25912-2015: Prestressed reinforced concrete slabs for aerodrome pavement. Specifications

GOST 26992-2016: Reinforced purloins for roofing in industrial and agricultural buildings. Specifications

GOST 27108-2016: Frame structures of reinforced concrete, prefabricated for multi-stored buildings with beams. Specification

GOST 28737-2016: Reinforced concrete foundation beams for buildings walls of industrial and agricultural enterprises. Specifications

GOST 31310-2015: Wall three-layer reinforced concrete panels with energy-efficient insulation. General specifications

GOST 32209-2013: Reinforced for overhead contact line supports оf railways. Specifications

GOST 32488-2013: Exterior wall panels of claydite-concrete for residential and public buildings. Specificatiоns

GOST 33147-2014: Automobile roads of general use. Reinforced concrete slabs. Methods of testing

GOST 33148-2014: Automobile roads of general use. Reinforced concrete slabs. Technical requirements

GOST 34028-2016: Reinforcing rolled products for reinforced concrete constructions. Specifications

GOST 34366-2017: Main pipeline transport of oil and oil products. Quality control of construction and installation works. Main provisions

GOST 6482-2011: Ferroconcrete nonpressure pipes. Technical specifications.

GOST 6927-2018: Сoncrete slabs for wall facing. Technical requirements

GOST 8020-2016: Concrete and reinforced concrete structures for man-holes of sewerage, water supply and gas supply pipeline systems. Specification

GOST 8717-2016: Concrete and reinforced concrete steps. Specification

GOST 948-2016: Reinforced concrete jumpers for buildings with brick walls. Specification

GOST 9561-2016: Reinforced concrete multihollow panels for floors in buildings. Specifications

GOST 9818-2015: Reinforced concrete flights of steps and stair landings. General specifications

GOST R 56589-2015: Claydite-concrete heating main chutes. Specifications

GOST R 56600-2015: Reinforced concrete prestressed slabs for pavements of roads. Specifications

GOST R 57993-2017: Trunk pipeline transport of oil and oil products. Concrete ballast units. General specifications

GOST R 58323-2018: Reinforced concrete pipes for trenchless laying of engineering networks. Technical conditions

Methodical recommendations 2-4-71-37-11: recommendations for the preparation of documentation for deregistration (type change) of civil defense protective structures

ODM 218.2.078-2016: Guidelines for the selection of the structure for strengthening the slopes of the road bed of public roads

RMD 52-12-2012 Sankt-Peterburg: Typical temporary concrete fences during work on the city’s road network

SP 27.13330.2017: Concrete and reinforced concrete structures intended for the service in elevated and high temperatures

SP 287.1325800.2016: Marine berthing facilities. Rules of design and construction

SP 329.1325800.2017: Buildings and structures. Rules of inspection after the fire

SP 339.1325800.2017: Designs from cellular concrete. Rules of design

SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84

SP 355.1325800.2017: Frame construction prefabricated reinforced concrete one-storey industrial buildings. Rules of design

SP 356.1325800.2017: Prefabricated reinforced concrete frame constructions multi-storey buildings. Rules of design

SP 387.1325800.2018: Spatial reinforced concrete structures of roofs and floors. Design requirements

SP 412.1325800.2018: The construction of foundations of high-rise buildings and structures. Work Rules

SP 414.1325800.2018: Fixed formwork. Design rules

SP 435.1325800.2018: Monolithic concrete and reinforced concrete structures. Rules for the production and acceptance of work

SP 45.13330.2017: Earthworks, grounds and footings

SP 46.13330.2012: Bridges and pipes

SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.

SP 63.13330.2018: Concrete and reinforced concrete structures. Key Points

SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87

SP 79.13330.2012: Bridges and culverts. Rules of examination and test

STO 64235108-008-2016: Easily removable KL covers. General requirements

Customers Who Viewed This Item Also Viewed:

Steel structures
Language: English
Price: $297.00
Concrete with polysterene aggregates. Specifications
Language: English
Price: $308.76
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Guidance on the selection of precautionary statements for the labelling in accordance with GOST 31340-2013
Language: English
Price: $301.95
Billet of rotor shafts and rings of turbine generators
Language: English
Price: $1,487.33
Vessels and apparatus. Norms and methods of strength calculation. Calculation of cylindrical and conical shells, convex and flat bottoms and covers
Language: English
Price: $287.10
Seismic building design code
Language: English
Price: $594.00
Aviation fuel for gas turbine engines JET A-1 (Jet A-1). Specifications
Language: English
Price: $150.66
On the approval of federal norms and rules in the field of industrial safety "General explosion safety rules for explosive and fire hazardous chemical, petrochemical and oil refining industries"
Language: English
Price: $819.95
Noxious substances. Classification and general safety requirements
Language: English
Price: $32.67
Safety valves of stream and hot-water boilers. Technical requirements
Language: English
Price: $57.42
Steam and hot-water boilers
Language: English
Price: $47.52
System of ensuring of geometrical parameters accuracy in construction. Manufacturing and assembling tolerances
Language: English
Price: $233.64
Manufacturing and quality control of steel structures for construction
Language: English
Price: $183.15
Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
Language: English
Price: $173.25
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Steel structures
Language: English
Price: $594.00
Buildings and structures foundations
Language: English
Price: $495.00
Pile foundations
Language: English
Price: $519.75
Basic norms of interchangeability. General tolerances. Limit deviations for linear and angular dimensions without tolerance indications
Language: English
Price: $37.62


MoldovaLaws.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!