GOST 16324-83

ГОСТ 16324-83

Cast iron diaphragm control valves with pneumatic diaphragm actuator

Клапаны регулирующие диафрагмовые чугунные с пневматическим мембранным исполнительным механизмом. Технические условия

Status: Not effective - Canceled. IUS 3-1991

The standard applies to regulating diaphragm cast-iron valves with a protective coating, flanged with a pneumatic diaphragm-spring-operated actuator (MIM), normally open (BUT) and normally closed (NC) for general industrial use at Py 0.4 MPa (4 kgf / cm2), Dy 40 and 50 mm; Py 0.6 MPa (6 kgf / cm2), Dy 20, 25 and 32 mm and Py 1.0 MPa (10 kgf / cm2), Dy 10 and 15 mm, designed to control the parameters of various technological processes on pipelines for liquid and gaseous corrosive media at a temperature of minus 15 degrees. Celsius to plus 110 degrees. Celsius, which provides durability of materials

Стандарт распространяется на регулирующие диафрагмовые чугунные клапаны с защитным покрытием, фланцевые с пневматическим мембранно-пружинным исполнительным механизмом (МИМ), нормально открытые (НО) и нормально закрытые (НЗ) общепромышленного назначения на Py 0,4 МПа (4 кгс/cм2), Dy 40 и 50 мм; Py 0,6 Мпа (6 кгс/см2), Dy 20, 25 и 32 мм и Рy 1,0 Мпа (10 кгс/см2), Dy 10 и 15 мм, предназначенные для регулирования параметров различных технологических процессов на трубопроводах для жидких и газообразных коррозионных сред при температуре от минус 15 град. Цельсия до плюс 110 град. Цельсия, в которых обеспечивается стойкость материалов

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Committee for Standards, 9/30/1983

SKU: RUSS65024

Price: $413.70


The Product is Contained in the Following Classifiers:

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.13 Testing and control of products of engineering industry » 4.13.1 Machinery, equipment and components for general engineering applications » 4.13.1.1 Components and assembly units for general engineering applications »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.060 Pipe fittings »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.060 Pipeline valves »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.060 Pipe fittings » 23.060.99 Other fittings »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.060 Pipeline valves » 23.060.99 Other fittings »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G1 General parts and units of machines » G18 Fittings and pipeline connections »


As a Replacement Of:

GOST 16324-70: Cast iron diaphragm control valves with pneumatic diaphragm actuator

The Document References:

GOST 10007-80: Polytetrafluoroethylene. Specifications

GOST 10549-80: Screw thread runout. Washout threads, total thread runouts, undercuts and chamfers

GOST 12.2.063-81: Occupational safety standards system. Industrial pipeline valves. General safety requirements

GOST 12815-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). Types. Connecting dimensions and dimensions of sealing surfaces

GOST 13373-67: Actuating pneumatic diaphragm-spring straight motion mechanisms SSI. Types. Basic parameters and dimensions

GOST 14192-77: Marking of cargoes

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 16093-81: Basic norms of interchangebility. Metric screw thread. Tolerances. Clearance fits

GOST 16337-77: High-pressure polyethylene. Specifications

GOST 16468-79: Dependability engineering. Information collecting and processing system. General principles

GOST 2.601-68: Unified system for design documentation. Exploitative documents

GOST 21929-76: Transportation of goods in packages. General requirements

GOST 24634-81: Wooden boxes for export products. General specifications

GOST 24705-81: Basic norms of interchangeability. Metric screw thread. Basic dimensions

GOST 25670-83: Basic norms of interchangeability. Limit deviations of dimensions without tolerance indication

GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.

GOST 4666-75: Valves. Marking and distinctive painting

GOST 8908-81: Basic norms of interchangeability. Standard angles and angle tolerances

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 9433-80: Grease ЦИАТИМ-221. Specifications

GOST 9701-79: Diaphragm and pinch control valves. Basic parameters

ST SEV 254-76: Pipeline connections and valves. Conditional passages

Customers Who Viewed This Item Also Viewed:

Steel structures
Language: English
Price: $297.00
Concrete with polysterene aggregates. Specifications
Language: English
Price: $308.76
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Guidance on the selection of precautionary statements for the labelling in accordance with GOST 31340-2013
Language: English
Price: $301.95
Billet of rotor shafts and rings of turbine generators
Language: English
Price: $1,487.33
Vessels and apparatus. Norms and methods of strength calculation. Calculation of cylindrical and conical shells, convex and flat bottoms and covers
Language: English
Price: $287.10
Seismic building design code
Language: English
Price: $594.00
Aviation fuel for gas turbine engines JET A-1 (Jet A-1). Specifications
Language: English
Price: $150.66
On the approval of federal norms and rules in the field of industrial safety "General explosion safety rules for explosive and fire hazardous chemical, petrochemical and oil refining industries"
Language: English
Price: $819.95
Noxious substances. Classification and general safety requirements
Language: English
Price: $32.67
Safety valves of stream and hot-water boilers. Technical requirements
Language: English
Price: $57.42
Steam and hot-water boilers
Language: English
Price: $47.52
System of ensuring of geometrical parameters accuracy in construction. Manufacturing and assembling tolerances
Language: English
Price: $233.64
Manufacturing and quality control of steel structures for construction
Language: English
Price: $183.15
Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
Language: English
Price: $173.25
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Steel structures
Language: English
Price: $594.00
Buildings and structures foundations
Language: English
Price: $495.00
Pile foundations
Language: English
Price: $519.75
Basic norms of interchangeability. General tolerances. Limit deviations for linear and angular dimensions without tolerance indications
Language: English
Price: $37.62

YOUR ORDERING MADE EASY!

MoldovaLaws.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!