RD 153-34.1-35.127-2002

РД 153-34.1-35.127-2002

General technical requirements for program and technical complex for technological process automated control system of thermal power plant

Общие технические требования к программно-техническим комплексам для АСУ ТП тепловых электростанций

Status: Valid until 12/25/2009

Requirements apply to software and hardware systems for automated process control systems of TPPs of UES of Russia and are intended for developers and manufacturers of hardware and software for creating new or upgrading software and hardware, as well as for organizations using hardware and software of domestic and foreign production in the Russian energy systems

Требования распространяются на программно-технические комплексы для АСУ ТП ТЭС ЕЭС России и предназначены для разработчиков и изготовителей ПТК при создании новых или модернизации программно-технических средств, а также для организаций, применяющих ПТК отечественного и зарубежного производства в энергосистемах РФ

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 67

Approved: RAO UES of Russia, 4/12/2002

SKU: RUSS19496

Price: $930.60




The Product is Contained in the Following Classifiers:

Power industry » 35. Automation, protection, interlocks, measuring instruments (including IIS ACS TP) »

ISO classifier » 27 ENERGY AND HEATING TECHNOLOGY » 27.100 Power stations in general »

ISO classifier » 29 ELECTRICAL ENGINEERING » 29.130 Switching and control equipment » 29.130.01 Switchgear and control equipment in general »


As a Replacement Of:

RD 34.35.127-93: General Technical Requirements for Hardware/Software Complexes for Thermal Power Station Automated Process Control Systems

The Document References:

GOST 12.1.002-84: Occupational safety standards system. Power frequency electric fields. Permissible levels of field strength and requirements for control at work-places

GOST 12.1.003-83: Noise. General safety requirements

GOST 12.1.004-91: Fire safety. General requirements

GOST 12.1.006-84: Occupational safety standards system. Electromagnetic fields of radio frequencies. Permissible levels at work-places and requirements for control

GOST 12.1.010-76: Explosion safety. General requirements

GOST 12.1.012-90: SSBT. Occupational Safety Standards System. Vibrational safety. General requirements

GOST 12.1.030-81: Electrical safety protective grounding, neutral grounding

GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination

GOST 12.1.045-84: Occupational safety standards system. Electrostatic fields. Tolerance levels and methods of control at working places

GOST 12.2.003-91: Industrial equipment. General safety requirements

GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements

GOST 12.2.007.6-75: Occupation safety standards system. Safety requirements. Switching devices for voltages below 1000 v

GOST 12.2.020-76: Explosion proof electrical apparatus. Terms and definitions. Classification. Marking

GOST 12.2.049-80: Occupational safety standards system. Industrial equipment. General ergonomic requirements

GOST 12997-84: SSI Products. General specifications

GOST 14254-96: Degrees of protection provided by enclosures (IP Code)

GOST 14691-69: Control devices for automatic regulation systems. Terms

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 15543.1-89: Electrical articles. General requirements for environmental climatic aspects stability

GOST 16962-71: Electronic and electrical equipment. Mechanical and climatic influence. Requirements and test methods

GOST 17516.1-90: Electrical articles. General requirement for environment mechanical stability

GOST 20.39.108-85: General requirements complex system. Human factors, inhabitancy and technical aesthetics requirements. Nomenclature and order of choice

GOST 22269-76: Man-machine system Operator workplace layout of workplace elements General ergonomic requirements

GOST 23216-78: Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods

GOST 24.104-85: Unified system of standards of computer control systems. Computer control systems. General requirements

GOST 24.701-86: Unified system of standards of computer control systems. Dependability of computer control systems. General positions

GOST 30328-95: Electrical relays. Insulation test

GOST 30336-95: Electromagnetic compatibility of technical equipment. Immunity to pulse magnetic field. Technical requirements and test methods

GOST 34.003-90: Information technology. Set of standards for automated systems. Automated systems. Terms and definitions

GOST 34.201-89: Information technology. Set of standards for automated systems. Types, sets and indication of documents for automated systems making

GOST 34.601-90: Information technology. Set of standards for automated systems. Automated systems. Stages of development

GOST 34.602-89: Information technology. Set of standards for automated systems. Technical directions for automated system making

GOST 34.603-92: Information technology. Types tests automated systems

GOST 4.148-85: System of product-quality indices. Low-voltage complete devices. Nomenclature of indices

GOST 6.10.4-84: Unified systems of documentation. Conferment of legal force to documents on software and machinogramme created by computers. General

GOST 6616-94: Thermoelectric converters. General specifications

GOST 6651-94: Thermal converters of resistance. General technical requirements and test methods

GOST 7192-89: Constant-speed electrical actuating mechanisms, ssi

GOST 8.009-84: State system for ensuring the uniformity of measurements. Standardized metrological characteristics of measuring instruments

GOST 8.207-76: Direct measurements with multiple observations. Observation data processing methods

GOST 8.395-80: Standard measurement conditions for calibration

GOST R 50628-2000: Electromagnetic compatibility of technical equipment. Immunity of personal computers to electromagnetic disturbances. Requirements and test methods

GOST R 50648-94: Electromagnetic compatibility of technical equipment. Immunity to power frequency magnetic field. Technical requirements and test methods

GOST R 50652-94: Electromagnetic compatibility of technical equipment. Immunity to damped oscillatory magnetic field. Technical requirements and test methods

GOST R 51317.4.11-99: Electromagnetic compatibility of technical equipment. Immunity to dynamic changes of power supply voltage. Requirements and test methods

GOST R 51317.4.17-2000: Electromagnetic compatibility of technical equipment. Immunity to d.c. power voltage ripples. Requirements and test methods

GOST R 51317.4.2-99: Electromagnetic compatibility of technical equipment. Immunity to electrostatic discharge. Requirements and test methods

GOST R 51317.4.3-99: Electromagnetic compatibility of technical equipment. Radiated, radio-frequency, electromagnetic field immunity. Requirements and test methods

GOST R 51317.4.4-99: Electromagnetic compatibility of technical equipment. Immunity to electrical fast transient/burst. Requirements and test methods

GOST R 51317.4.5-99: Electromagnetic compatibility of technical equipment. Microsecond high energy pulse disturbance immunity. Requirements and test methods

GOST R 51318.22-99: Electromagnetic compatibility of technical equipment. Man-made radio disturbance from information technology equipment. Limits and test methods

GOST R 8.563-96: State system for ensuring the uniformity of measurements. Procedures of measurements

GOST R 8.583-2001: State system for ensuring the uniformity of measurements. Medical ultrasonic therapeutic equipment. General requirements for measurement procedures of the acoustic output performance in the frequency range from 0,5 MHz to 5,0 MHz

GOST R 8.585-2001: State system for ensuring the uniformity of measurements. Thermocouples. Nominal static characteristics of conversion

MI 2438-97: State system for ensuring uniform measurement. Measuring systems. Metrological assurance. Basic provisions.

MI 2439-97: National system for measurements unification. The measuring system metrological characteristics. Notation. The principles of regulation, definition and control.

PR 50.2.006-94: Procedure for calibration of measurement equipment

PR 50.2.014-96: Metrological Regulations. National System for Standardization of Measurements. Accreditation of Metrological Services of Juridical Persons for Verification of Measuring Devices

PR 50.2.016-94: National Measurement Standards. Requirements for Calibration Procedures

R 50-34.119-90: Recommendations. Information technology. Set of standards for automated systems. Architecture of local area networks in industrial automation systems. General provisions

RD 153-34.0-11.117-2001: Information and measurement systems. Metrological support. General provisions.

RD 153-34.0-11.201-97: Method for the Determination of General Metrological Characteristics of Measurement Channels of Measurement Systems and Automated Process Control Systems According to Metrological Characteristics of Aggregate Means of Measurement

RD 153-34.0-11.204-97: Method for Acceptance from Adjustment of Measurement Channels of Data Systems

RD 153-34.0-11.205-98: Procedural Guidelines. Measurement Channels of Measurement Systems. Organization and Procedure for Calibration

RD 153-34.0-11.209-99: Recommended Practice. Automated Electric Energy and Power Monitoring and Metering Systems. Standard Method for Measurements of Electric Energy and Power

RD 153-34.0-20.525-00: Methodical guidelines for monitoring grounding of electrical installations

RD 153-34.1-35.137-00: Technical requirements for microprocessor technology based process protection subsystem

RD 153-34.1-35.142-00: Procedural Guidelines for Operation of Microprocessor-Based Process Protective Means

RD 153-34.2-35.520-99: General Technical Requirements for Hardware/Software Complexes for Automated Process Control Systems Hydroelectric Generating Stations

RD 153-34.3-35.613-00: Maintenance Requirements for Protective Relaying and Control System Switchgear for 0.4-35 kV Networks

RD 34.03.201-97: Safety Code for the Operation of the Thermo mechanical Equipment of Electric Power Stations and Heat Networks.

RD 34.09.451: Model Algorithms for Calculation of Technical/Financial Indicators of High-Capacity Cogeneration Plants. Part 1:Organizational and Technical Basis of Calculations

RD 34.09.454: Model Algorithm for Calculation of Technical-Financial Indicators of Condensing Power Units with Power of 300, 500, 800 and 1200 MW

RD 34.11.103-95: Recommended Practice for Compiling Index of Means of Measurement in Use at Electric Power Facilities to Monitor Process Parameters, for Which the Measurement Accuracy is not Standardized

RD 34.11.106-95: Procedural Ordinance on Accreditation of Metrological Services of Electric Power Facilities for Calibration Operations

RD 34.11.112-96: Procedural Guidelines. Procedure for Certification of Metrological Service (Calibration Laboratory) Personnel of Electric Power Facilities for Calibration Operations

RD 34.11.113-95: Procedural Guidelines. Metrological Monitoring and Inspection by Main and Base Metrological Services at Electric Power Facilities

RD 34.11.202-95: Procedural Guidelines. Measurement Channels of Measurement Systems. Organization and Procedure for Metrological Certification

RD 34.11.206-94: Procedural Guidelines. Measurement Systems. Method for Processing Experimental Data for Metrological Certification

RD 34.11.321-96: Standards for Error in Measurement of Process Parameters of Thermal Power Stations and Substations

RD 34.11.408-91: Model Program for Metrological Certification of Telemetry Channels of Operational Information Complex of Automated Dispatch Control System

RD 34.11.409-92: Standard Algorithms for Automated Processing of Experimental Data for Metrological Certification and Verification of Measurement Channels of Measurement Systems

RD 34.11.410-95: Methodological guidelines for the establishment of nomenclature of measuring instruments used on the electricity power plants, and subject to verification

RD 34.11.502-95: Procedural Guidelines. Organization and Procedure for Metrological Conformity Assessment of Documentation in the Development and Design Stage

RD 34.20.501-95: Technical operation rules for power plants and networks of the Russian federation

RD 34.35.127-93: General Technical Requirements for Hardware/Software Complexes for Thermal Power Station Automated Process Control Systems

RD 34.35.310-97: General Technical Requirements for Microprocessor-Based Protective Relaying and Automation Devices of Power Systems

RD 34.49.101-87: Design Guidelines for Fire Protection for Energy Facilities

RD 50-34.698-90: Methodological instructions. Information technology. Set of standards and guidelines for automated systems. Automated systems. Requirements for the content of documents.

RD 50-680-88: Standardization management document. Methodical instructions. Automatic systems

RD 50-682-89: Methodical instructions. Information technology. Standards and management package for computer systems. General provisions.

RMG 29-99: State system for ensuring the uniformity of measurements. Metrology. Basic terms and definitions

GOST 27.003-90: Reliability in engineering. Make-up and general rules for assigning reliability requirements

POT R M-016-2001: Inter-Industry Occupational Safety and Health Regulations (Safety Regulations) for Operation of Electrical Installations

RD 153-34.0-35.617-2001: Rules for maintenance of relay protection devices, electroautomatics, remote control and signaling of power plants and substations 110-750 kV

RD 34.11.114-98: Automated Electric Energy and Power Monitoring and Metering Systems. Basic Specified Metrological Characteristics. General Requirements

The Document is Referenced By:

RD 153-34.1-35.145-2003: Technical requirements for the function of the P & C of the automated process control system of TPP "Collection and primary processing of information"

RD 153-34.1-35.523-2002: Methodical instructions for rational application of control & monitoring hardware on tpp boiler-and-turbine equipment, with installed tp acs

SO 34.35.146-2003: Guidelines for the creation of automated process control systems for water treatment plants (TLU) power plants

Customers Who Viewed This Item Also Viewed:

Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production
Language: English
Price: $620.73
Steel structures
Language: English
Price: $297.00
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $106.92
Loads and actions
Language: English
Price: $495.00
High strength rolled steel. General specification
Language: English
Price: $144.54
Mark of conformity for obligatory certification form, dimensions dnd technical requirements
Language: English
Price: $37.62
Ceramic sanitary ware. Types and principal dimensions
Language: English
Price: $155.43
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English
Price: $307.89
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Vessels and apparatus. Norms and methods of strength calculation. Calculation of shells and bottoms from the impact of supporting loads
Language: English
Price: $230.67
Determination of categories of rooms, buildings and external installations on explosion and fire hazard
Language: English
Price: $123.75
Pipeline valves. Terms and definitions
Language: English
Price: $97.02
Regulations on the design of fire protection of power enterprises
Language: English
Price: $253.44
Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods
Language: English
Price: $218.79
Tube-billets for machining
Language: English
Price: $88.27
Plywood with external layers of deciduous veneer for general use
Language: English
Price: $110.88
Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
Language: English
Price: $173.25
Regulations of design and safe operation of pressure vessels
Language: English
Price: $297.00
Traction electrical devices
Language: English
Price: $175.23
Rules of design, manufacturing and acceptance of welded steel vessels and apparatuses
Language: English
Price: $244.53

YOUR ORDERING MADE EASY!

MoldovaLaws.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message live-chat-up-arrow live-chat-down-arrow

Leave your message in the form below, and we will write back by e-mail!