GOST 12.2.007.8-75

ГОСТ 12.2.007.8-75

Devices for electric welding and plasma treatment

Устройства электросварочные и для плазменной обработки

Status: Effective. The limitation of effectiveness has been lifted: Resolution of the State Standard No. 564 of 06.22.92

The standard applies to electrical devices that are part of electric welding equipment and equipment for plasma processing, and establishes safety requirements for their design. The standard does not apply to devices intended for operation under water, in mines, mines and space.

Стандарт распространяется на электротехнические устройства, входящие в состав электросварочного оборудования и оборудования для плазменной обработки, и устанавливает требования безопасности к их конструкции. Стандарт не распространяется на устройства, предназначенные для эксплуатации под водой, в шахтах, рудниках и космосе.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 12

Approved: State Committee of Standards of the Council of Ministers of the USSR, 9/10/1975

SKU: RUSS16670

Price: $91.14




The Product is Contained in the Following Classifiers:

Welding regulations » Welding work »

Welding regulations » Welding materials »

Welding regulations » welding equipment »

Welding regulations » Welding staff »

Welding regulations » Non-destructive control »

Welding regulations » Defects »

Welding regulations » Welding work » Mechanized welding »

Welding regulations » Welding work » Automatic welding »

Welding regulations » Welding work » Surfacing »

Welding regulations » Welding work » Dusting »

Welding regulations » Welding materials » Gases »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 004/2011 TR CU. About safety of low voltage equipment » Regulations and standards (to TR CU 004/2011) »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » III Occupational safety requirements for production equipment and processes » 2 Safety requirements for certain types of work » 2.10 Operation of electrical installations, electrical equipment and power tools »

ISO classifier » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.100 Safety of professional activity. Industrial hygiene »

National standards » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.100 Safety of professional activity. Industrial hygiene »

ISO classifier » 25 MECHANICAL ENGINEERING » 25.160 Welding, brazing and hard soldering » 25.160.30 Welding equipment »

National standards » 25 MECHANICAL ENGINEERING » 25.160 Welding, brazing and hard soldering » 25.160.30 Welding equipment »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T5 Documentation System » T58 System of standards infield of nature conservation and improvement of use of natural resources, labor safety, scientific organization of labor »


The Document References:

GOST 12.1.003-83: Noise. General safety requirements

GOST 12.1.012-90: SSBT. Occupational Safety Standards System. Vibrational safety. General requirements

GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements

GOST 12.2.007.10-87: Occupational safety standards system. Installations, generators and induction heaters for electrothermics, ultrasonic installations and generators. Safety requirements

GOST 12.3.003-86: Occupational safety standards system Electric welding works. Safety requirements

GOST 12.4.026-76: Signal colors and safety signs

GOST 14254-96: Degrees of protection provided by enclosures (IP Code)

GOST 14651-78: Electrode holders for manual arc welding

GOST 9541-75: X-ray protective glass plates. Specifications

GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods

The Document is Referenced By:

GOST 10580-2006: Technological foundry equipment. General specifications

GOST 12.1.013-78: Occupational safety standards system. Construction. Electrical safety. General requirements

GOST 12.2.008-75: Equipment and facilities for gas-flame treatment of metals and thermal

GOST 12.2.041-79: Occupational safety standards system. Drilling equipment. Safety requirements

GOST 12.2.119-88: Occupational safety standards system. Rotary and rotary conveyor automatic lines. General safety requirements

GOST 12.2.232-2012: Occupational safety standards system. Surface drilling equipment. Safety requirements

GOST 12.3.003-86: Occupational safety standards system Electric welding works. Safety requirements

GOST 12.3.039-85: Occupational safety standards system. Plasma treatment of metals. Safety requirements

GOST 13821-77: Single-operator rectifiers with falling external characteristics for arc welding. General specifications

GOST 14651-78: Electrode holders for manual arc welding

GOST 1639-2009: Non-ferrous metals and alloys scrap and waste. General specifications

GOST 1639-78: Non-ferrous metals and alloys scrap and waste. General specifications

GOST 1639-93: Non-ferrous metals and alloys scrap and waste. General specifications

GOST 17772-88: Semiconducting photoelectric detectors and receiving photoelectric devices. Methods of measuring photoelectric parameters and determining characteristics

GOST 18130-79: Semi-automatic machines for consumable electrode arc welding

GOST 22782.0-81: Explosion-proof electrical equipment

GOST 22782.2-77: Explosion-proof electric equipment

GOST 22782.4-78: Explosion-proof electrical apparatus. Pressurized enclosure. Technical requirements and methods of testing

GOST 22917-78: Cable couplings for arc welding. Specifications

GOST 2402-82: Welding sets with internal combustion engines

GOST 24754-2013: Mining electrical equipment of normal production. General technical requirements and test methods

GOST 24754-81: General purpose mining electric equipment

GOST 26054-85: Industrial robots for resistance welding

GOST 26056-84: Industrial robots for arc welding

GOST 297-80: Resistance welding machines

GOST 304-82: Welding generators.

GOST 30852.0-2002: Explosionproof electrical apparatus. Part 0. General requirements

GOST 33976-2016: Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control

GOST 5981-2011: Cans and metallic preserve caps. Technical specifications.

GOST 7012-77: Single-operator single-phase transformers for automatic submerged arc welding. General specifications

GOST 7237-82: Welding converters

GOST 8.237-77: State system for ensuring the uniformity of measurements. Measuring resistance coil. Methods and means of verification

GOST 8213-75: Automatic consumable electrode arc welding machines.

GOST 95-77: Single-operator single-phase transformers for manual arc welding. General specifications

GOST R 12.2.133-97: Occupational safety standards system. Polygraphic equipment. Safety requirements and test methods

GOST R 12.2.141-99: Occupational safety standards system. Surface drilling equipment. Safety requirements

GOST R 50599-93: Welded steel vessels and apparatus under high pressure. Non-destructive control while the manufacturing and operating

GOST R 51330.0-99: Explosionproof electrical apparatus. Part 0. General requirements

GOST R 53192-2008: Welded steel structures of freight cars. Technical requirements

GOST R 53192-2014: Welded joints in steel structures of railway rolling stock. Requirements for design, production and quality control

GOST R 54564-2011: Non-ferrous metals and alloys scarp and waste. General specifications

GOST R 55554-2013: Electrode Holders the underwater welding also are sharp. General specifications

MU OT RM 02-99: Assessment of the safety of workplaces for their certification of working conditions

OST 2 N83-44-80: Occupational safety standards system. Arc and electroslag welding. Safety requirements

OST 2 N83-45-80: Occupational safety standards system. Contact welding. Safety requirements

OST 2 N83-46-80: Occupational safety standards system. Oxygen cutting. Safety requirements

OST 2 Н83-44-80: Occupational safety standards system. Electric arc welding and slag welding. Safety requirements.

OST 2 Н83-45-80: Labour safety standard system. Contact welding. Safety requirements.

OST 2 Н83-46-80: Labour safety standard system. Oxygen cutting. Safety requirements.

OST 24.050.34-84: Wagon steel structures design and production. Specifications.

OST 24.940.01-90: Welded steel structures. General technical requirements.

OST 26-04-2153-77: Labour safety standard system. Cryogenic equipment. General safety requirements and constructions.

OST 26-07-2028-81: Surfacing the sealing surfaces of pipe with Э-20Х13type electrodes. Technical requirements.

OST 32.50-95: Designing, manufacturing, installation and testing of electrical equipment for the diesel-electric rolling stock. Technical requirements

OST 36-100.2.03-84: Occupational safety standards system. Labour saving tools. Installation tools and devices. General safety and ergonomics requirements.

PB 09-220-98: Installation and Safe Operation Requirements for Ammonia-Based Refrigeration Equipment

RD 08-272-99: Safety requirements for drilling equipment for the oil and gas industry.

RD 22-207-88: Lifting machines. General requirements and production standards

RD 31.52.18-87: Fire safety regulations during fire works on ships of the Ministry of the Navy of the USSR

RD 31.83.04-89: Labour safety rules in companies of the Ministry of Navy of the USSR.

RD 34.03.201-97: Safety Code for the Operation of the Thermo mechanical Equipment of Electric Power Stations and Heat Networks.

RD 34.03.204: Safety rules when working with tools and accessories

RD 39-0147014-535-87: Instructions for welding at installation and repair of pipelines and critical metal structures in organizations and enterprises of the Ministry of oil and gas industry.

STB 1172-99: Non-destructive testing. Control with penetrating (capillary) substances. General provisions

STB 1568-2005: Occupational safety standards system. Printing equipment. Safety requirements and test methods

VSN 006-89: Construction Of Main And Field Pipelines Welding

VSN 169-84: Safety Guidelines for Pipe Welders

GOST 23274-84: Mobile buildings. Electrical devices. General specifications

GOST R 58361-2019: The main pipeline transport of oil and oil products. Welding equipment. General specifications

PI 1.4.75-2000: Arc welding in shielding gases of structural, stainless and heat-resistant steels and alloys

POT R M-023-2002: Industry-Wide Occupational Safety and Health Requirements for Gas Flame Working of Materials

POT R O 00030171: Labor protection rules during the operation of navigable hydraulic structures

POT R O 97300-12-97: Labor protection regulations in the beer and non-alcoholic food industry

POT R O-14000-003-98: Rules for labor protection in the manufacture of boiler work and metal structures

VNTP 1-31-80/MChM SSSR: Instructions and norms for technological design and technical and economic indicators of the energy sector of ferrous metallurgy enterprises. Metallurgical plants. Volume 7. Electricity

Customers Who Viewed This Item Also Viewed:

Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Foundation bolts. Structure and dimensions
Language: English
Price: $198.99
Hot-rolled sheet. Range
Language: English
Price: $72.27
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
Electromagnetic compatibility of multimedia equipment. Emission requirements
Language: English
Price: $974.64
Non-destructive testing. Method of magnetic particle testing. Standard technological processes
Language: English
Price: $292.05
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20
Rolling stock of railways. Springs cylindrical screw. Certification requirements
Language: English
Price: $175.65
Steel structures
Language: English
Price: $297.00
Technical Regulations of the Eurasian Economic Union "On Restriction of the Use of Hazardous Substances in Electrical and Radioelectronic Products"
Language: English
Price: $83.16
Metal products from structural alloy steel. Specification
Language: English
Price: $371.25
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Steel building structures. General specifications
Language: English
Price: $250.17
Fencing constructions for translucent buildings and structures. Design rules
Language: English
Price: $609.15
Tests on electric and optical cables under fire conditions. Part 3-22. Flame spread of vertically-mounted bunched wires or cables. Category A
Language: English
Price: $102.96

YOUR ORDERING MADE EASY!

MoldovaLaws.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!